MCR3510 Contact Smart Card Reader is the ideal PC-Linked USB contact smart card reader for a huge variety of applications. Providing full compliance with all major industry standards such as ISO/IEC 7816, USB CCID, PC/SC, and Microsoft WHQL the MCR3510 seamlessly works with virtually all contact smart cards and PC operating systems.
MCR3510 Contact Smart Card Reader
Description of MCR3510 Contact Smart Card Reader
Optional Accessory
Specification of MCR3510 Contact Smart Card Reader
Parameter | MCR3510 |
Host Interface | |
Host Interface | USB 2.0 CCID (USB 1.1/ 3.0 compliant) |
Communication Speed | 12 Mbps (USB2.0 full speed) |
Smart Card Interface | |
Supported standards |
ISO/IEC 7816 Part 1 to 4 EMV 2008 Ver4.2 Level 1 |
Supported Tag ICs | All major ISO/IEC 7816 compliant Smart Card IC support |
Protocols | T=0, T=1 |
Interface speed |
up to 600 kBit/s (depending on card) TA1=97 |
Clock frequency | ISO/IEC 7816 compliant up to 5 MHz Operates up to 12 MHz |
Supported smart card types | 5V, 3V and 1.8V, ISO/IEC 7816 Class A/B/C |
Power to smart card | 60mA in Class A; 55mA in Class B; 35mA in Class C |
Smart card detection |
Card present switch Automatic power on/off Short Circuit protection |
Card size | ID-1 |
Contact type | Landing Contac Socket (8 pin) |
Driver& Software | |
PC/SC driver |
PC/SC Specification Ver. 2.01.09 for
MacOS 10.5.x, 10.6.x, 10.7.x, 10.8.x |
Software |
PC/SC API CT-API (through wrapper on top of PC/SC) Synchronous-APl (through wrapper on top of PC/SC) M-Card API (through wrapper on top of PC/SC) |
Operating Conditions | |
Power supply | USB Bus powered |
Power consumption | < 25mA, excluding smart card; < 500uA in Standby Mode |
Dimension | 73x58x17mm |
Weight | 52g± 5%/0.15 lb±5% |
Operating temperature range | 0° to +50*C/ +32 to+122 F |
Storage temperature range | -20 to +60°C/-4 to +140 F |
Operating humidity range | Up to 95% RH non condensing |
Durability | Sliding Contacts 100.000 Card Insertions |
MTBF | 100. 000 hours |
Connector | 1.5m USB Cable with USB Type A Connector |
Status indicator | LED |
Firmware | I SmartOS™ |
Firmware in-field upgradeable | No |